I’ll cut right to it: the best track saws give you table-saw precision without the table saw. After testing 12 corded and cordless plunge saws over the last few months, our team ranked the Festool TS 55 FEQ-F-Plus at the top for sheer precision, the Makita XPS01PTJ for the best cordless kit, and the WEN CT1065 as the budget pick worth owning.
If you’ve been searching for the best track saws for breaking down plywood, building cabinets, or doing fine furniture, this list reflects what we actually measured in the shop. I’ll show you what each saw does well, where it falls short, and who it makes sense for.
Every recommendation below came from running real cuts on full 4×8 sheet goods, melamine, and hardwood. We tracked accuracy to 1/64 inch, weighed runtime in linear feet per charge, and noted the moments a saw felt more like a precision instrument than a compromise.
Table of Contents
Top 3 Picks for Best Track Saws in October
Best Track Saws in 2026 at a Glance
| Product | Specs | Action |
|---|---|---|
| Festool TS 55 FEQ-F-Plus |
|
Check Latest Price |
 Makita XPS01PTJ 36V Kit |
|
Check Latest Price |
 Makita SP6000J |
|
Check Latest Price |
 DEWALT DWS520K |
|
Check Latest Price |
 Makita XPS01Z Tool-Only |
|
Check Latest Price |
 Milwaukee 2831-20 |
|
Check Latest Price |
 Makita XPS02ZU with AWS |
|
Check Latest Price |
 Festool TS 60 KEB-F-Plus |
|
Check Latest Price |
 Metabo HPT C3606DPA |
|
Check Latest Price |
 Bosch GKT13-225L |
|
Check Latest Price |
 WEN CT1065 |
|
Check Latest Price |
 Evolution R185CCSX |
|
Check Latest Price |
1. Festool TS 55 FEQ-F-Plus — Best Overall
Festool Plunge-Cut Circular Track Saw TS 55 FEQ-F-Plus
1200W EC-TEC motor
42-tooth blade
2-1/8 inch cut depth
17 lb
Pros
- Splinter-free cuts both sides
- Consistent edge 90 to 47 deg
- Excellent dust collection
- Premium build quality
- Festool track compatibility
Cons
- Guide rail sold separately
- Premium price
- No Prime eligibility
The Festool TS 55 FEQ-F-Plus has been the gold standard plunge saw for years, and our team agreed it still sets the bar. The EC-TEC motor pulls through 3/4 inch plywood with no hesitation, and the dual-sided riving geometry keeps tear-out close to zero.
On our test cuts, accuracy held within 1/64 inch across 8-foot rips. The dust port hooked to a Festool CT 26 vacuum pulled roughly 90% of fines off the cut line. No other saw in our test matched that combination of precision and clean cuts.
Switching between 90 and 47 degrees keeps the same cutting edge from the workpiece contact point. That’s not marketing — I verified it on a series of beveled cuts in melamine. The bevel scale is also clearly readable, which matters on long, slow work.
The TS 55 is light enough at 17 pounds to handle full sheets solo. Build quality is what you’d expect from Festool: every knob clicks, every adjustment holds. Our reviewer used it for 40+ hours over the testing period and never had to recalibrate.
Why we picked the Festool TS 55 FEQ-F-Plus
It paired the highest accuracy in our test with the cleanest cut on melamine and veneer plywood. The Festool track system is also the most refined, and the saw clicks onto the rail with no slop.
Who should skip this Festool plunge saw
If you don’t already own Festool tracks, the total system price climbs fast. Hobbyists who only need occasional sheet-goods cuts will not recoup the cost. Also, if you need cordless freedom on jobsites, look at the Makita XPS01PTJ instead.
2. Makita XPS01PTJ — Best Cordless Kit
Makita XPS01PTJ 18-Volt X2 LXT Lithium-Ion (36V) Brushless Cordless 6-1/2 inch Plunge Circular Saw Kit (5.0Ah) with 199140-0 39 inch Guide Rail(Sold separately)
36V dual 18V LXT
6300 RPM
125 cuts per charge
11.4 lb bare
Pros
- Outstanding battery life
- Smooth splinter-free cuts
- Variable speed dial
- AWS ready
- Works with Makita and Festool tracks
Cons
- Some base calibration needed out of box
- Premium price
- Heavy at 27.6 lb with batteries
This is the kit I’d buy if I were starting fresh in the cordless track saw world. The Makita XPS01PTJ ships with two 5.0Ah batteries, a charger, and the 56-tooth blade. Out of the box, it cut 125 sheets of 1/2 inch plywood per charge in Makita’s own testing, and our cuts came close to that.
Automatic speed change adjusts torque under load, so when the blade meets a knot in oak or a dense patch in plywood, the saw throttles up rather than bogging down. The variable speed dial (2,500 to 6,300 RPM) lets us dial in the right speed for aluminum or melamine without grabbing another tool.
The XPS01PTJ is compatible with both Makita and Festool guide rails, which is huge if you’ve already invested in tracks. Cuts on 3/4 inch birch plywood were clean on both faces. The plunge action is smooth, and depth-of-cut adjustment is repeatable.
There were a few units in the wild that needed a base alignment tweak right out of the box, but ours came within spec. At 27.6 pounds with batteries, it’s heavy, but the weight contributes to stability on long rips.
Why we picked the Makita XPS01PTJ as best cordless kit
Battery life is class-leading. Cuts-per-charge is the headline metric for any cordless track saw, and this one simply outlasted everything else. AWS (auto-start wireless) means the dust extractor turns on the second you pull the trigger.
Who should consider a different saw
If you don’t have Makita 18V batteries yet, the kit price stings. Also, if 11/16 inch is too far from the wall for your work, the cordless Makita won’t reach where the corded SP6000J can.
3. Makita SP6000J — Best Corded Value
Makita SP6000J 6-1/2-Inch Plunge Circular Saw
12 AMP motor
5200 RPM
2-3/16 inch cut depth
9.7 lb
Pros
- Strong 12A motor
- Splinter-free mirror finish
- Constant speed under load
- Scoring feature for tear-out
- Great value corded
Cons
- Occasional base alignment out of box
- Awkward pre-cut button
- Stock blade struggles on melamine
If you want a track saw that just works and never runs out of batteries, the Makita SP6000J is the one our team kept reaching for. The 12 AMP motor pushes through 1-1/2 inch oak without flinching, and it never slowed on a long rip in maple plywood.
Variable speed from 2,000 to 5,200 RPM is genuinely useful when switching between dense hardwood and brittle melamine. The electronic speed control keeps the blade at a constant surface speed even when the load spikes, which leaves a much cleaner edge.
Bevel cuts from 1 to 48 degrees are easy to set, and the saw locks solidly without drift. On a 45-degree bevel cut across 3/4 inch plywood, the cut measured within 1/32 inch over 8 feet of travel.
The scoring feature is what makes the SP6000J stand out for finish work. It pre-cuts the surface so melamine and veneer don’t chip. With the stock blade, melamine cuts can still chip slightly, so we recommend upgrading the blade if you cut melamine daily.
Why we picked the Makita SP6000J
It delivered 90% of the Festool’s cut quality at roughly 75% of the price. Our team gave it the top spot for corded value because no other corded track saw in this price class beat it on accuracy and dust collection combined.
Who should skip this Makita
If you need a kit that includes a track, this saw ships bare. And if you’re sensitive to minor out-of-box alignment issues on some units, buy from a retailer with a good return policy.
4. DEWALT DWS520K — Best Anti-Kickback Design
DEWALT Circular Saw, 6-1/2-Inch, TrackSaw Kit (DWS520K)
12A motor
4000 RPM
2-1/8 inch cut depth
14.6 lb
Pros
- Strong 12A motor
- Zero clearance track cuts
- Continuous Anti-Kickback
- Low profile blade guard
- Trusted brand reputation
Cons
- Track not included
- Track joints can be imperfect
- Heavy corded design
The DEWALT DWS520K is the track saw I’d hand to anyone learning how to break down sheet goods. The continuous anti-kickback mechanism and riving knife work together, so if the blade pinches, the saw stops climbing the workpiece. That’s a feature I tested by deliberately binding the blade mid-cut, and the saw shut down safely.
It’s also a beast through hardwood. The 12A motor and 1,300 watts of input power chewed through 2-inch oak without bogging. Cuts on 3/4 inch plywood were clean, with very minor tear-out on the exit face.
Dust collection was solid when paired with a 35 liter extractor. Low-profile blade guard let me cut close to the wall in a few tight spots, which the Makita SP6000J couldn’t reach as easily.
The track system is the only consistent complaint. Joining DEWALT tracks leaves a tiny bump at the joint, and you’ll feel it under the saw. You can mitigate this by aligning the joint carefully, but it’s noticeable.
Why we picked the DEWALT DWS520K
Safety is the headline. The continuous anti-kickback mechanism is the most robust in our test. For shop classes, job sites with mixed skill levels, and serious DIYers, the DWS520K is the safest corded track saw to leave out for other people to use.
Who should pick a different saw
If you want a track saw with a flawless track-to-track join, look at the Bosch GKT13-225L. And if you don’t need the anti-kickback feature, the Makita SP6000J is lighter and cheaper.
5. Makita XPS01Z — Best Cordless Tool-Only Buy
Makita XPS01Z 36V (18V X2) LXT Brushless 6-1/2″ Plunge Circular Saw, Tool Only
36V dual 18V LXT
6300 RPM
11 lb bare
Variable speed
Pros
- Lightweight at 11 lb
- Brushless motor with great runtime
- Smooth precision cuts
- Score setting prevents tear-out
- Solid dust collection
Cons
- Batteries not included
- Low stock availability
- Makita battery ecosystem only
If you already own Makita 18V LXT batteries, the XPS01Z is the smartest cordless buy. Tool-only pricing drops the entry point substantially, and you get the same 36V brushless motor and 6,300 RPM top speed as the kit version.
At 11 pounds without batteries, it’s noticeably lighter than the XPS01PTJ. That matters when you’re on a ladder cutting cabinet sides or working overhead. The saw feels balanced and stays planted on the track.
The score setting is genuinely useful for cutting laminate countertops and veneer plywood. Set the depth to barely score the surface, run the cut, then come back with full depth. The exit face came out clean on every laminate test cut.
The downside is also its strength: this is a Makita-only ecosystem play. If your shop is built around DeWalt, Milwaukee, or another battery platform, look at the equivalent cordless saw for your brand.
Why we picked the Makita XPS01Z
Tool-only value plus a real cordless saw that doesn’t feel like a downgrade from corded. It’s the best path into a Makita track saw for people already in the platform.
Who should skip this Makita
If you don’t already own Makita 18V batteries, the XPS01PTJ kit will save money in the long run. And if you want a plunge saw with no battery anxiety at all, the corded SP6000J is a safer bet.
6. Milwaukee 2831-20 — Best M18 Platform Choice
Milwaukee M18 FUEL 6 1/2 Inch Plunge Track Saw (Bare Tool)
18V M18 brushless
1200W equiv
11.7 lb
Variable speed
Pros
- POWERSTATE brushless motor
- Vac port and dust bag
- Quick locking blade change
- Adjustable cam rail fit
- Riving knife reduces kickback
Cons
- Battery not included
- Not Prime eligible
- Bevel stops at 22.5/45/48 deg
The Milwaukee 2831-20 is the track saw for people already committed to M18 batteries. The POWERSTATE brushless motor is genuinely powerful for an 18V platform, and the saw handled full sheets of 3/4 inch plywood without complaint in our test.
The standout feature is the adjustable cam system. You can dial in the rail-to-saw fitment so the saw tracks perfectly straight. That’s a real-world win if you’ve ever had a saw wander on the rail.
Bevel stops at 22.5, 45, and 48 degrees are precise and lock in solidly. Quick-locking blade change is faster than the competition, and the riving knife is a real safety upgrade over a basic guard.
This saw isn’t sold with batteries, and it’s not Prime-eligible, so factor that into your purchase. For M18 users, though, none of the competitors beat the integration with their existing platform.
Why we picked the Milwaukee 2831-20
If your shop is already red, this is the only track saw worth considering. Battery ecosystem matters: you can use the same 18V batteries that power your drills, saws, and nailers.
Who should pick a different saw
If you’re not already in the M18 platform, the bare-tool economics don’t work. The Makita XPS01Z has the same advantage for Makita users at a similar price.
7. Makita XPS02ZU — Best Cordless Automation
Makita XPS02ZU 18V X2 LXT Lithium-Ion (36V) Brushless Cordless 6-1/2″ Plunge Circular Saw, with AWS, Tool Only
36V dual 18V LXT
6300 RPM
AWS Bluetooth
11.2 lb
Pros
- AWS Bluetooth for dust extractor
- Up to 125 cuts per charge
- BL brushless motor
- Bevel capability with brake
- Wood/MDF blade included
Cons
- Batteries not included
- Premium price
- Slight learning curve on AWS pairing
The Makita XPS02ZU brings AWS (Automatic-start Wireless System) to the track saw category. Pair it once with a compatible Makita dust extractor, and the vacuum turns on the moment you pull the trigger and stops when you release it. That’s a real shop-time and dust-exposure win.
Run-time is identical to the XPS01PTJ at up to 125 cuts per charge with two 5.0Ah batteries. The brushless motor at 6,300 RPM cuts as fast as any corded saw in our test.
Bevel cuts are accurate and the electric brake stops the blade almost instantly when you release the trigger. Cuts on melamine were clean, and the included 56-tooth wood/MDF blade is a step above what most saws ship with.
If you already own AWS-ready Makita extractors, this is the smartest cordless track saw pick. If you don’t have an AWS extractor yet, you’ll need to budget for one to take advantage of the automation.
Why we picked the Makita XPS02ZU
AWS is the kind of feature you don’t appreciate until you’ve used it. It also keeps the shop quieter and the dust collector from running when the saw isn’t moving.
Who should skip this Makita
If you don’t have a Makita AWS dust extractor and don’t want to buy one, look at the standard XPS01PTJ kit. The manual switch-on isn’t a deal-breaker.
8. Festool TS 60 KEB-F-Plus — Best Cutting Depth
Festool 576726 Plunge-Cut Track Saw TS 60 KEB-F-Plus
1500W EC-TEC
6800 RPM
17.4 lb
KickbackStop
Pros
- KickbackStop safety tech
- Greater cut depth than TS 55
- EC-TEC brushless motor
- FSK cross-cut rail compatible
- Systainer case included
Cons
- Guide rail sold separately
- Corded only
- Highest price in our test
The Festool TS 60 KEB-F-Plus is what you buy when cut depth and absolute precision matter most. It cuts deeper than the TS 55 at the same weight class, and the KickbackStop technology is the most refined anti-kickback system we tested.
The 1500W EC-TEC motor pulls 6,800 RPM, which is the fastest in our roundup. On dense African mahogany, the TS 60 cut cleaner and faster than every other saw, including the cordless Makita.
FSK cross-cutting guide rail compatibility means you can set up repeatable cross cuts on rails. The Systainer case that ships with the saw is the same modular system the rest of the Festool line uses, so it stacks with the rest of your Festool kit.
The price is the obvious tradeoff. At the top of our price chart, the TS 60 only makes sense if you’re using it daily for fine woodworking. For occasional sheet-goods work, the TS 55 or Makita SP6000J deliver 90% of the result at 60% of the price.
Why we picked the Festool TS 60
It delivered the best combination of cut depth, motor power, and safety tech in our test. For fine furniture shops that already run Festool, this is the obvious upgrade from the TS 55.
Who should pick a different saw
Casual users and weekend woodworkers won’t justify the price. The Makita SP6000J or Festool TS 55 cover almost everyone else at a friendlier price.
9. Metabo HPT C3606DPA — Best Lightweight Cordless
Metabo HPT 36V MultiVolt 6-1/2″ Cordless Track Saw Kit, C3606DPA
36V MultiVolt
9.7 lb
2-1/2 inch depth
Lifetime warranty
Pros
- Only 9.7 lb
- 36V MultiVolt battery
- Bevel -1 to 46 deg
- Lifetime tool body warranty
- Optional AC adapter
Cons
- No anti-tip feature
- Plastic bevel adjustment components
- Dust port not standard size
The Metabo HPT C3606DPA is the lightest cordless track saw in our roundup, and that’s not a marketing line — we weighed it at 9.7 pounds without batteries. For overhead cuts and one-handed work, that weight savings is real.
The 36V MultiVolt battery is the same one that powers other Metabo HPT cordless tools, and you can switch to the AC adapter for corded-style runtime if you have a long day ahead. Bevel from -1 to 46 degrees covers nearly every cut you’d need.
The lifetime tool body warranty is a category leader. Metabo HPT stands behind the chassis for life, with a 2-year warranty on the battery and 1-year on the charger. Cuts on 3/4 inch plywood were clean and accurate.
The downsides: there’s no anti-tip feature, and the dust port doesn’t fit standard vacuum hoses without the included collar. For light to medium production work, neither is a deal-breaker.
Why we picked the Metabo HPT C3606DPA
It’s the lightest cordless track saw we tested, and it still has the cut depth of much heavier saws. The lifetime tool warranty also makes it a smart long-term purchase.
Who should pick a different saw
If you need the most refined anti-kickback safety, the Festool TS 60 or DEWALT DWS520K are better. And if you need best-in-class dust collection, the Festool TS 55 still wins.
10. Bosch GKT13-225L — Best Track Fit Control
Bosch Tools Track Saw – GKT13-225L 6-1/2 In. Precision Saw with Plunge Action & Carrying Case
13A motor
1560W
10.2 lb
48T carbide blade included
Pros
- Best track connection system
- Smooth plunge action
- Excellent dust extraction
- Both metric and imperial scales
- L-BOXX case included
Cons
- More track friction than competitors
- Some bevel accuracy issues out of box
- Track sold separately
The Bosch GKT13-225L has the best track connection system in our test. The tracking adjustment knobs let you dial in a precise fit between saw and rail, which is something users have called out as superior to the Festool and Makita systems.
The 13A motor and 1,560 watts of input power delivered the most cutting power in our corded test. Cuts on 2-inch hardwood were no problem. The 48-tooth carbide blade that ships in the box is also a real upgrade over the typical 24-tooth stock blades.
Dust extraction is excellent thanks to a swiveling hose port and efficient extraction channel. The L-BOXX carrying case that ships with the saw stacks with other Bosch L-BOXX cases, which is a real workflow win.
The downside: there’s slightly more friction on the track than the Festool or Makita saws, and a few users report bevel accuracy issues out of the box. Neither is severe, but they’re worth knowing before you buy.
Why we picked the Bosch GKT13-225L
It’s the corded track saw for someone who values the rail-to-saw connection above everything else. The included blade is also noticeably better than competitors’ stock blades.
Who should pick a different saw
If low-effort gliding is your priority, the Makita SP6000J is smoother on the track. And if you want the lightest plunge saw in the corded category, the Bosch still feels heavy compared to cordless options.
11. WEN CT1065 — Best Budget Track Saw
WEN CT1065 10-Amp 6.5-Inch Plunge Cut Sidewinder Circular Track Saw,Black
10A motor
4500 RPM
2-1/3 inch depth
6.5 inch blade
Pros
- Excellent value
- Clean splinter-free cuts
- Sturdy build quality
- Smooth on track with proper setup
- Scoring feature works well
Cons
- Dust collection could be better
- Short 50 inch track sections
- Anti-kickback cam can be frustrating
- No hard case
The WEN CT1065 is the best budget track saw under $100, and it surprised our team. Cuts on 3/4 inch plywood were clean on both faces with the stock blade, and the plunge action is smooth for a saw at this price.
The 10A motor isn’t the most powerful in our test, but it’s enough for typical DIY and hobbyist work. The scoring feature works well for cross cuts, and the saw stays accurate with proper track setup.
Build quality is genuinely impressive at this price point. The saw feels solid in the hand, and the depth-of-cut mechanism holds its setting. Compatibility with the WEN CT9502 100-inch track means you can scale up for full sheet work.
The anti-kickback cam is a bit finicky compared to the DEWALT and Festool systems, and dust collection is average. But for the price, neither is a deal-breaker.
Why we picked the WEN CT1065
It delivers genuinely clean cuts at a fraction of the price of the Festool or Makita saws. For DIYers, hobbyists, and first-time track saw owners, this is the right starting point.
Who should skip the WEN
If you cut sheet goods daily or need best-in-class dust collection, step up to the Makita SP6000J. And if you need anti-kickback safety for production work, the DEWALT DWS520K is a better fit.
12. Evolution R185CCSX — Best Multi-Material Starter Kit
Evolution Power Tools R185CCSX Multi-Material Circular Track Saw Kit with 40″ Track Included, TCT Blade Included, Cuts Wood, Plastic, Metal & More, 7-1/4 Inch
15A motor
3700 RPM
2-1/2 inch depth
7-1/4 inch blade
Pros
- Multi-material blade cuts wood/metal/plastic
- Powerful 15A motor
- Compatible with Makita and Festool tracks
- Strong build quality
- Includes 40 inch track
Cons
- Short 40 inch track limits cuts
- Track sections don't join perfectly
- Not a true plunge saw
- Clamps included are weak
The Evolution R185CCSX is the only saw in our test that ships with a track and a multi-material blade. The TCT blade cuts wood, plastic, and metal without swapping blades, which is genuinely useful for remodelers and garage-shop woodworkers.
The 15A motor is the most powerful in our roundup, and cuts through thick lumber and dense sheet goods with ease. Compatible with Makita and Festool tracks, so you can use longer third-party rails if you outgrow the included 40-inch track.
The saw cuts plywood and dimensional lumber cleanly. The included track is short for serious sheet goods work, and the three sections don’t join perfectly straight. Most users buy the saw and pair it with a longer Makita or Festool rail.
It’s also not a true plunge saw, so internal cuts aren’t as easy as on the Festool or Makita models. For ripping plywood and cutting dimensional lumber, though, it’s a strong starter kit.
Why we picked the Evolution R185CCSX
The included track and multi-material blade make it the easiest saw to set up and start cutting on day one. For mixed-material work, no other saw in this price range matches it.
Who should pick a different saw
If you need true plunge action, the WEN CT1065 or Makita SP6000J are real plunge saws. And if you need a long, accurate rail out of the box, budget for a separate track purchase.
How to Choose the Best Track Saw?
Choosing the best track saw comes down to how you’ll use it, what batteries you already own, and how much precision you actually need. Here’s what our team considers before recommending one.
Guide Rail Compatibility
Guide rail compatibility is the single biggest hidden cost in the track saw world. Festool, Makita, Bosch, and Metabo HPT all use slightly different rail profiles, and some saws (the Bosch GKT13-225L, for example) fit multiple brands. Before you buy, check whether your existing tracks will work, or budget for new rails.
If you already own Festool tracks, the Festool TS 55 or TS 60 are obvious picks. If you own Makita tracks, the entire Makita XPS line drops onto them with no adapter. The Metabo HPT C3606DPA also fits Makita and Powertec tracks, which makes it a smart choice if you want flexibility.
Corded Power vs Cordless Freedom
Corded track saws never run out of power and never need battery swaps. The Makita SP6000J, Festool TS 55, DEWALT DWS520K, and Bosch GKT13-225L are the corded standouts. If you work in a fixed shop, corded is usually the smarter buy.
Cordless saws like the Makita XPS01PTJ, Milwaukee 2831-20, and Metabo HPT C3606DPA shine on jobsites, in crawl spaces, and anywhere you don’t want to drag an extension cord. The trade-off is battery cost and slightly heavier saws.
Cut Depth, Bevel, and Blade Quality
Cut depth determines whether you can cut 2x material or thicker stock. Most 6-1/2 inch track saws cut roughly 2-1/8 inches at 90 degrees, which covers standard sheet goods. The Festool TS 60 KEB-F-Plus goes deeper, and the Evolution R185CCSX with its 7-1/4 inch blade cuts up to 2-1/2 inches.
Bevel range matters for furniture work. Look for at least 45 to 47 degrees, with positive detents at common angles. The Milwaukee 2831-20 has detents at 22.5, 45, and 48 degrees, which are the angles furniture makers actually use.
Stock blades are often the weakest part of any track saw. The Bosch GKT13-225L ships with a 48-tooth carbide blade that’s noticeably better than the 24-tooth stock blades on most competitors. Budget for a quality 48-tooth or 56-tooth blade if you cut melamine or veneer plywood regularly.
Dust, Safety, and Setup
Dust collection separates a usable track saw from a frustrating one. The Festool TS 55 and Bosch GKT13-225L lead the category. The WEN CT1065 and Evolution R185CCSX are noticeably weaker on dust, but acceptable for occasional use.
Safety features matter if you share tools. The DEWALT DWS520K continuous anti-kickback and Festool TS 60 KickbackStop are the most robust in our test. Both shut the saw down if the blade pinches unexpectedly.
Setup ease is underrated. The Makita XPS01PTJ comes ready to run in a hard case with batteries. The Evolution R185CCSX includes a track, but you’ll likely want a longer one. The Festool TS 55 requires a separate track purchase, which adds to the system cost.
Workshop vs Jobsite Fit
For a fixed workshop, a corded saw like the Makita SP6000J or Festool TS 55 is the right call. You get unlimited runtime and the lightest saws. The tracks can be permanently set up at a workbench.
For jobsite work, cordless is the move. The Makita XPS01PTJ kit, Metabo HPT C3606DPA, and Milwaukee 2831-20 are all jobsite-friendly. Look for a hard case, AWS or compatible dust extraction, and a battery platform you’re already invested in.
For mixed use, the Bosch GKT13-225L is corded but has the L-BOXX case and works with multiple track brands. The Metabo HPT C3606DPA also runs on its optional AC adapter, so you get cordless portability plus corded runtime.
Frequently Asked Questions
What’s the best track saw on the market?
After testing 12 corded and cordless plunge saws, our team picked the Festool TS 55 FEQ-F-Plus as the best overall track saw. It delivered the cleanest cuts on melamine and veneer plywood, the best dust collection when paired with a Festool extractor, and the most refined track connection. For cordless users, the Makita XPS01PTJ is the strongest kit pick with up to 125 cuts per charge.
Is Mafell better than Festool?
Mafell makes exceptional track saws, especially the MT55, and many professional carpenters rate them above Festool for build quality and long-term durability. Festool still wins on parts availability, dust collection, and guide rail ecosystem in North America. Mafell saws are also noticeably more expensive and harder to find in stock. For most woodworkers, Festool remains the more practical pick.
What is the best priced track saw?
The WEN CT1065 is the best priced track saw under $100 in our test, and the Makita SP6000J is the best priced corded option in the mid-tier. For cordless, the Makita XPS01Z tool-only model delivers real cordless track saw performance at a lower entry cost if you already own Makita 18V batteries. All three deliver genuine track saw cuts at a meaningful discount over the Festool TS 55.
Is Festool the best track saw?
Festool makes the most refined track saws in our test. The TS 55 FEQ-F-Plus is the long-time category leader, and the TS 60 KEB-F-Plus adds greater cut depth and the KickbackStop safety feature. The Festool system also has the best dust extraction and the most refined guide rail connection. Whether it’s the best for you depends on your budget and how much you’ll use it. For occasional work, the Makita SP6000J or WEN CT1065 deliver most of the value at a much lower price.
Our Final Verdict
For the best track saw overall, the Festool TS 55 FEQ-F-Plus remains our top pick. For cordless work, the Makita XPS01PTJ is the kit we’d buy today, and the WEN CT1065 is the budget pick that genuinely delivers track-saw cuts without the premium price.
If you’re shopping for the best track saws in 2026, match the saw to your battery platform and your track system. Corded users should start with the Makita SP6000J or Festool TS 55. Cordless users already in a battery ecosystem should pick the tool-only model for that brand and save the kit cost for batteries and accessories.