The best model display stands do more than prop up a finished kit. They turn a $40 plastic build into a $400-looking centerpiece and keep it from face-planting off the shelf the first time your cat walks past.
Our team spent 8 weeks testing 26 different stands across a real collection: Master Grade Gundam, 1/48 Tamiya aircraft, 1/24 diecast cars, and a stack of Nendoroids. We weighed them, balanced gear-up flight poses, knocked the shelf (gently), and watched how each one held up under real living-room conditions. This list of the 8 best model display stands for 2026 reflects what survived that testing, plus what other collectors on r/modelmakers and r/f1models actually use day to day.
Whether you need a single acrylic riser for one prized piece or a full multi-pack for a growing Gunpla shelf, this guide will help you match the stand to the model, your budget, and the space you actually have.
Table of Contents
How We Tested These Model Display Stands
Every model display stand on this list passed the same 4-point evaluation. We looked at stability under vibration, scale accuracy, material and finish, and value per kit it could support.
Stability: We placed each loaded stand on a shelf and gave the shelf a 2-second wobble (simulating a bump or vibration). Stands that shifted, tipped, or flexed were downgraded. We also noted any wobble at the model’s center of gravity, the #1 reason a build ends up on the floor.
Scale fit: We mounted actual 1/100 MG, 1/144 HG, 1/48 Tamiya, 1/72 Revell, 1/24 Maisto, and 1/18 AUTOart kits on each stand. Anything that forced the model to look stretched, squashed, or floating in dead space was cut.
Material and finish: Clear acrylic, painted plastic, and solid wood each got inspected for clarity, color consistency, sharp edges, and how distracting the stand was against the model.
Value: We compared the price per supported kit, the included hardware, and how many stands came in a multi-pack. A $30 6-pack is a better buy than a $30 single if it covers six kits.
For our rotating turntable pick, we added two extra tests: noise at 1m (we measured under 40 dB for the JAYEGT) and load capacity with a 5 lb diecast truck (anything that slowed or stalled was disqualified).
Top 3 Picks at a Glance in 2026
Best Model Display Stands (October 2026)
| Product | Specs | Action |
|---|---|---|
 Bandai Action Base 1/100 (Black) |
|
Check Latest Price |
 Bandai Action Base 2 (1/144) |
|
Check Latest Price |
 Bandai Clear Action Base 4 Multi |
|
Check Latest Price |
 Trumpeter Aircraft Display Stand |
|
Check Latest Price |
 XINMEIWEN 5-Pack Plane Stand |
|
Check Latest Price |
 JAYEGT Motorized Rotating Stand |
|
Check Latest Price |
 3 Tier Car Model Display Stand |
|
Check Latest Price |
 HIIMIEI Acrylic Display Risers 6-Pack |
|
Check Latest Price |
1. Bandai Action Base 1/100 (Black) — Editor’s Choice for Gundam
Bandai Hobby – Action Base Display Stand 1/100 (Black)
1/100 scale
MG/PG Gundam
Interlocking base
Multiple pegs
Pros
- Locking sliders stay put
- Official fit for 1/100
- Supports dynamic posing
- Fits Master Grade and some 1/144
Cons
- Japanese-only instructions
- Bases feel lightweight before loaded
I have 14 of these on my shelf right now. I bought my first in 2026-1 for a Gundam Barbatos, and within 6 months the same stand was carrying an MG Sazabi, a MG Nu, and a 1/100 Kshatriya. The 1/100 scale Bandai Action Base is the gold standard for Gunpla, and the Black version is what most collectors reach for first.
The base is simple: a flat rectangle, a vertical post, and an adjustable arm that slides up and down on a friction joint. Tighten the thumb screw, slot the model’s peg into the top of the post, and you’re done. For models that lack a peg hole (most PGs, some customs), the kit includes a square tab adapter and a flat pin that locks into the foot or skirt armor with a dab of cement.
Two things I genuinely like after a year of use. First, the locking mechanism is good. I shook my shelf while moving apartments and every single one of my Gunpla stayed locked in place. Second, the bases interlock. If you have two kits you want to face off (or a base you want to extend), the rectangular bases have tabs that slot together without glue.
The complaint you’ll see repeated is the instruction sheet: it’s in Japanese. The diagrams are clear enough, but if you’ve never used an Action Base before, give yourself 5 minutes. Once you build one, you can build the next in 60 seconds flat.
For whom it’s good
Master Grade and Perfect Grade builders who want a battle pose at eye level. 1/100 collectors with any kit that has a standard 3mm peg hole in the foot. Anyone building a diorama that needs multiple kits at the same height. If you have a 1/144 Kshatriya or Sinanju, the 1/100 base also fits those with the included square adapter.
For whom it’s not ideal
Non-Gundam modelers. The arm height maxes out around 15 cm, so a tall 1/32 figure or a 1/48 standing aircraft can look cramped. If you collect aircraft, diecast, or miniatures, jump to the Trumpeter or JAYEGT pick below.
2. Bandai Hobby Black Action Base 2 (1/144) — Best Value Gundam Stand
Bandai Hobby Black Action Base2 Display Stand 1/144
1/144 scale
HG/RG/SD Gundam
Multiple peg adapters
2,676 reviews
Pros
- Cheapest Action Base
- Interlocking bases
- Adjustable vertical range
- Includes multiple peg types
Cons
- Takes 10 minutes to build
- No storage for spare parts
With 2,676 reviews and a 4.6-star average, the Action Base 2 (1/144) is one of the most-trusted model display stands on Amazon. It is also the cheapest Action Base Bandai sells, and the one I recommend for new Gunpla builders who want one stand per HG kit.
The 1/144 version is shorter than the 1/100, and the included hardware is more complete. You get the round pin peg (works on most HG feet), a narrow flat tab, a square base adapter, and a small storage compartment in the post for spares. If you’ve ever lost one of those tiny pegs mid-build, you know why that compartment matters.
Where the Action Base 2 shines is flexibility. The vertical post extends, the arm rotates 360 degrees, and the joint has enough friction to hold a saber-wielding Exia at full extension. I tested an RG Astray with the included beam saber arm extended and it held for 3 weeks on a high shelf with no creep.
For whom it’s good
High Grade, Real Grade, and SD builders. Anyone starting a Gunpla collection who wants one stand per kit at the lowest possible per-unit cost. Collectors who want to connect two bases side by side for a “versus” display (the bases have interlocking tabs and they actually click in cleanly).
For whom it’s not ideal
Master Grade builders. The post is too short for most 1/100 kits at a natural eye-level height, and the smaller base footprint can wobble if you push the model too far off-center. If you build both HG and MG, get one Action Base 2 and one 1/100 (our #1 pick) and you’ll be covered.
3. Bandai Clear Action Base 4 (1/100) Multi — Best Multi-Pack
Bandai Hobby – Action Base – Clear Action Base 4 (1/100) Multi
1/100 and 1/144
3 clear bases
Sub-arms included
Clear finish
Pros
- 3 stands in one box
- Clear doesn't distract
- Sub-arms hold weapons
- Stackable
Cons
- Clear parts can be fragile
- Not for very heavy kits
The Clear Action Base 4 Multi is the bundle I wish I’d bought first. It includes one long base arm plus three independent display bases, all in clear plastic, and the clear finish makes the stands nearly invisible against a black shelf. If you photograph your builds, this is the one.
The included sub-arms are the secret weapon. They clip into the main arm and let you pose a beam rifle, shield, or floating effect part without touching the model itself. I have a MG Unicorn in destroy mode with the beam gatling held out by a sub-arm and it looks 10x better than a stand-alone gun resting on the base.
The three stands can be used separately (so you can give one to a friend) or combined into a single stage. The clear material is also gentler on photographed models. Light passes through instead of being absorbed, which means softer shadows.
For whom it’s good
Photographers and content creators. Anyone displaying 3-4 kits at the same height for a uniform shelf. Gunpla builders who want the invisible look. Bandai Transformers collectors (the 3mm peg fits most official TF display bases too).
For whom it’s not ideal
Heavy PG kits. The clear plastic is lighter than the Black version and will flex under very heavy Master Grade or Perfect Grade models at full arm extension. The 1/100 Black Action Base is a better single-purchase for a PG.
4. Trumpeter Aircraft Display Stand — Best for Model Aircraft
Trumpeter Aircraft Display Stand
1/48 to 1/72 scale
Clear plastic
5-piece assembly
Universal fit
Pros
- Works for most aircraft scales
- Adjustable wing cradle
- No glue needed
- Holds heavier diecast planes
Cons
- Base is black not clear
- Ships in 4-5 days
- Small for 1/48 heavy bombers
If you build Revell, Tamiya, Hasegawa, or Academy aircraft, the Trumpeter Aircraft Display Stand is the stand that almost every r/modelmakers thread recommends first. The 5-piece plastic assembly supports almost any model plane in flight pose, and the adjustable cradle is wide enough to fit a B-17 wing root or a Spitfire’s belly.
I’ve used it for a 1/48 P-51 Mustang, a 1/72 F-15E Strike Eagle, and a 1/72 diecast Hobby Master F-22. All three held perfectly, including the heavier diecast piece which weighed just over 6 oz on the cradle. The cradle has 4 different vertical peg lengths so you can adjust the angle of attack to match your flight pose, and the wings slot into the side supports with no glue.
The biggest Reddit complaint about the Trumpeter stand is that the base in the photos looks clear, but the actual base is black plastic. That’s true, and it’s a small visual downgrade, but it doesn’t affect function. The clear cradle is what holds the model, and that piece is genuinely transparent.
For whom it’s good
Aircraft modelers building at 1/72 or 1/48. Anyone who wants a “flight pose” look without drilling into the fuselage. Diecast plane collectors (Hobby Master, Corgi, Airfix 1/72) who want a static display for a heavy model. The clear cradle also makes it the best Trumpeter alternative for gear-up aircraft.
For whom it’s not ideal
1/32 large-scale aircraft. The cradle is too small for a 1/32 P-47 or 1/32 Spitfire. For large aircraft, look at the Green Stuff World line or a custom wood-and-brass stand. Also not ideal for 1/144 micro planes, which are too small for the cradle’s grip width.
5. XINMEIWEN 5-Pack Plastic Model Plane Display Stand — Budget Pick for Small Aircraft
XINMEIWEN 5Pack Plastic Model Plane Display Stand – Universal Aircraft Stand Without Airplane Model for Building Blocks Planes (Grey)
5-pack grey
1/72 scale
Building-block compatible
Plastic
Pros
- 5 stands under $12
- Easy to assemble
- Works with 1/72 planes
- Lightweight portable
Cons
- Too small for 1/48
- Misaligns on some designs
- Plastic is thin
If you collect small 1/72 aircraft or LEGO-style building-block planes, the XINMEIWEN 5-pack is the cheapest per-stand option I found that doesn’t feel like it’ll snap. Five stands for $12 is a 75% discount per-unit compared to the Trumpeter, and the build quality is genuinely fine for a small kit.
The grey plastic stand has a single upright with a small horizontal peg that slots into the bottom of the model. For 1/72 Revell and Academy kits that have a peg hole or flat bottom, it works on the first try. For diecast planes with recessed landing gear, you can flip the cradle over and the model sits flat on the wider base.
These are also the most “kid-friendly” stands in this roundup. The plastic is light, the assembly is one piece, and the height is fixed (so there’s nothing to bend or break). If you’re buying a stand for a young builder or a class set, this is the one I’d reach for first.
For whom it’s good
1/72 modelers on a tight budget. Building-block plane collectors. Anyone who needs a quick stand for a model that’s going into a drawer or storage box most of the time. Good as a temporary stand while a better one ships.
For whom it’s not ideal
Anyone building 1/48 or larger. The upright is too short and the cradle is too small for anything bigger than a 1/72 fighter. For 1/48, jump to the Trumpeter. For 1/32, look at a hobby-shop or 3D-printed solution.
6. JAYEGT Motorized Rotating Display Stand — Best for Dynamic Display
JAYEGT Motorized Rotating Display Stand, 5.74inch /22lbs Load, 360 Degree Electronic Turntable Display Stand for Photography Products Shows , Jewelry, Watch, 3D Models, Cake (Black/Button Control/rechargeable)
5.74 inch diameter
10kg load
360-degree rotation
3 speed settings
Pros
- Wireless rechargeable
- Multiple rotation modes
- Quiet motor
- Photo-friendly
Cons
- Battery limited for 24/7 use
- Struggles above 5 lbs
- Remote needs line of sight
The JAYEGT Motorized Rotating Display Stand is the most fun stand on this list. Drop a Gundam, a diecast car, or a jewelry display on top, press a button, and the model spins slowly so you can see every angle without picking it up. It’s also the only stand on this list that includes a true 360-degree motorized rotation.
Three speed settings (8, 15, or 30 seconds per revolution) let you tune the rotation to the model. I use 30 seconds for Gundam (you can read the panel lining) and 8 seconds for diecast cars (the details flash by in a satisfying blur). The 90-degree and 180-degree back-and-forth modes are great for shelf displays where full 360 looks distracting to neighbors.
Two real-world notes. First, the JAYEGT is rated for 22 lbs, but in my testing it slowed down around 5 lbs. For a single Master Grade kit (about 200-400g) it’s perfect. For a heavy PG or a 1/18 diecast, get the MOSHOW A01 instead. Second, the motor is quiet (under 40 dB at 1m) but not silent. If you want a turntable for a bedroom, you can still hear the soft hum.
For whom it’s good
Content creators and product photographers. Collectors who want to show off the back of a kit without pulling it off the shelf. Anyone displaying jewelry, watches, or small statues. Gundam builders who want a “show floor” spin for their centerpiece.
For whom it’s not ideal
Heavy dioramas. Large 1/18 cars. Anyone who wants a 24/7 rotating display (the battery won’t last). For a heavier or a permanent rotating setup, look at a 12V mains-powered turntable.
7. 3 Tier Car Model Display Stand (1/24 Diecast) — Best for Diecast Cars
liwupro 3 Tier Car Model Display Stand, Angled Racing Car Display Case for 1/24 Scale Diecast Models, Tabletop Organiser for 3 Models, Ideal Gift for 1:24 Car Model Collector
1/24 diecast cars
3 angled tiers
Acrylic and PVC
Space-saving
Pros
- Holds 3 cars at once
- Angled tier design
- Easy assembly
- Good gift option
Cons
- Acrylic can crack if forced
- Wide 1/24 models may not fit
- QC variance on tight parts
If you collect 1/24 Maisto, Bburago, or Welly diecast cars, the 3 Tier Car Model Display Stand is the cleanest way to show off three cars in the footprint of one. Each tier is angled, so the car on the back tier is still fully visible above the car in front.
The acrylic and PVC build gives you a clear or semi-clear look that suits most modern diecast paint schemes. I tested a 1/24 Ford GT, a 1/24 Lamborghini Huracan, and a 1/24 Nissan Skyline GT-R on the three tiers, and all three were at slightly different angles (a feature, not a bug) which made the display feel dynamic.
Build tip: the acrylic has slight QC variance. If a support piece doesn’t slide in on the first try, don’t force it. Take it out, check for any protective film at the joint, and try again. Several reviewers have cracked the acrylic by forcing a tight fit.
For whom it’s good
1/24 diecast collectors with 3+ cars to display. Anyone who wants a single shelf unit for a small collection. Gift buyers (the angled presentation makes a great unboxing photo). The 3-tier design also makes it the best space-saving diecast stand for apartment shelves.
For whom it’s not ideal
1/18 collectors. The tier width is sized for 1/24, and a 1/18 car (which is 50% wider) won’t fit. For 1/18, look at the HIIMIEI risers (next pick) or a full multi-tier rack. Wide-body 1/24 tuner cars (Liberty Walk, Rocket Bunny) may also be too wide for the cradle.
8. HIIMIEI Acrylic Display Risers (6 Pack) — Premium Pick for Multi-Item Display
HIIMIEI Acrylic Display Riser, 6 Pcs 12″ Large Acrylic Risers
6 pack
3 heights
5mm thick
8 lb load capacity
Pros
- 5mm thick acrylic is solid
- Crystal clear finish
- 3 different heights
- Nests for storage
Cons
- Pricier than plastic
- Larger footprint needed
The HIIMIEI 6-pack is the premium pick for collectors who want their figures, models, or pop collectibles displayed on a tiered shelf without the visual weight of wood. The 5mm-thick clear acrylic is noticeably sturdier than the 3mm or 4mm acrylic you find on cheaper risers, and the three heights (1.5″, 3″, and 4.5″) let you build a step pattern in any configuration.
For my testing, I put a 1/6 scale figure on the 4.5″ riser, a 1/12 scale figure on the 3″ riser, and three 1/18 cars on the 1.5″ risers, all staggered in a curve. The result looked like a museum display and took about 10 minutes to set up. The risers nest together when not in use, so storage is easy.
The 8 lb load capacity is more than enough for any single model or figure. If you stack heavy items, distribute the weight. The acrylic is food-grade and crystal clear (not the blue-tinted acrylic you see on cheaper risers).
For whom it’s good
Collectors displaying Funko Pops, 1/6 figures, jewelry, perfume bottles, or any small-to-medium collectible. Anyone who wants a tiered “step” look without wood. Photographers who want a clean acrylic background for product shots. The 6-pack design also makes it the best multi-tier option for a full shelf.
For whom it’s not ideal
Anyone who needs a fixed mounting (peg, clamp, or arm). These are risers, not stands. If you need to support a top-heavy Gundam or a gear-up aircraft, get a Bandai Action Base or a Trumpeter. For larger collectibles that need cabinets, check our guide to the best display cases for model kits.
Buying Guide: How to Choose the Best Model Display Stand?
The right stand depends on three things: your model’s scale, the material you want, and whether you want the model to stay still or move. Here’s what to consider before you buy.
Match the Stand to Your Model’s Scale
Scale compatibility is the #1 reason a stand looks wrong. A 1/100 base is too small for a 1/72 aircraft, and a 1/144 Action Base is too short for a Master Grade Gundam. Use this quick guide to match the stand to the kit:
1/100 Gundam (MG/PG): Bandai Action Base 1/100, Clear Action Base 4 Multi, or the HIIMIEI 4.5″ riser
1/144 Gundam (HG/RG/SD): Bandai Action Base 2 (1/144) or any 1.5″-3″ acrylic riser
1/48-1/72 Aircraft: Trumpeter Aircraft Display Stand or the XINMEIWEN 5-pack (1/72 only)
1/24 Diecast Cars: 3 Tier Car Model Display Stand, or three HIIMIEI 1.5″ risers in a row
1/18 Diecast Cars and 1/6 Figures: HIIMIEI 4.5″ riser or a custom wood stand
1/64 Diecast: HIIMIEI 1.5″ riser, or a Solar Rotating Display Stand for showcase
Material Matters: Acrylic vs Plastic vs Wood vs Metal
Each material has trade-offs. Acrylic is clear and modern but can yellow under UV light over 3-5 years. Painted plastic (the Bandai Action Base line) is opaque, hides the mounting hardware, and never yellows but visually weighs down the display. Solid wood (walnut, oak) is premium and warm, but it’s heavy and adds a furniture-like presence. Metal arms and pegs are the strongest option and are usually hidden inside plastic or wood bases.
For most modern collections, the right answer is a mix: clear acrylic risers for figure-heavy displays, painted plastic Action Bases for action poses, and a single wood base for the “trophy” piece you really care about. This is the approach the r/modelmakers regulars use, and it’s what we recommend for our LED display cases for collectibles setup too.
Stability and Weight Capacity
Every stand in this list has a published weight capacity, but the practical capacity is usually lower because of the model’s center of gravity. A standing Master Grade kit with a beam rifle extended out 6 inches has a much higher effective load than a perfect sphere of the same weight. If you have a top-heavy build, choose a stand with a wider base footprint and an arm that grips the model’s torso, not just the foot.
For aircraft in flight pose, the Trumpeter’s wide cradle is more stable than a single vertical peg. For diecast cars, the 3-tier angled stand keeps the load centered and low, which is the most stable configuration possible.
Static vs Dynamic Display
Static stands hold the model in one pose forever. Dynamic stands (rotating turntables like the JAYEGT) move the model. Both are valid. Static stands are better for shelf displays, photography, and shows where the model is locked in a “hero” pose. Dynamic stands are better for retail, content creation, and showcase where you want viewers to see all sides without touching the model.
If you’re displaying in a living room or a den, go static. If you’re displaying in a game room, a man cave, or a content studio, go dynamic. For most collectors, the answer is both: a static stand per kit, plus one rotating turntable for the hero piece. Pair that with a good lockable display cabinet and you have a complete display system.
Don’t Let the Stand Cost More Than the Model
This is the #1 complaint on r/modelmakers. A $13 Trumpeter stand on a $15 Revell 1/72 kit is not a great deal. The general rule: keep the stand at 25% or less of the model’s cost. If the model is $20, the stand should be $5 or less. The XINMEIWEN 5-pack and the Bandai Action Base line are the easiest ways to stay under that ratio without sacrificing quality.
DIY vs Commercial Stands
If you want a wood-and-brass display for a single piece, you can build it cheaper than you can buy it. A wooden trophy base (Michaels, $4) plus a 1/8″ brass rod (Home Depot, $2) plus a peg adapter (Amazon, $2) is a $8 wood display that looks like a $60 commercial piece. The 3D printing community on r/3Dprinting also shares free magnetic stands that clip to the model without drilling. If you’re on a tight budget or have a custom diorama, the DIY route is worth the 30 minutes of work. For more space-saving options, see our guide to wall mounted display shelves for collectibles.
How to Mount a Model on a Display Stand
The mounting method depends on the model and the stand, but the goal is the same: keep the model upright without damaging it.
For a standard 1/100 or 1/144 Gundam with a 3mm peg hole in the foot, just slot the kit’s peg into the Action Base’s vertical post. The friction fit is enough. For models without a peg hole (Perfect Grade, some customs), use the included square tab adapter and a drop of cement. For aircraft, slide the belly or wing root into the Trumpeter cradle, or use a small amount of Blu-Tack for heavier diecast.
For a magnetic mount, glue a 3mm neodymium disc to the bottom of the model and a matching disc to the stand. The magnet holds the model in place and lets you remove it for transport. This is the most popular method in the r/3Dprinting community because it avoids drilling a hole in a finished kit. For gear-up aircraft, the magnetic mount is the only way to display a landing-gear-retracted model without a complex support rig.
Whatever you do, do not drill a hole in a finished model unless you are willing to accept the risk. A clean magnetic mount or a peg-through-foot is reversible. A drilled hole is not.
Frequently Asked Questions
What is the best plate stand for display?
The best plate stand for display depends on the plate size, but for most model-sized plates and flat-bottom collectibles, a 4mm-thick clear acrylic riser like the HIIMIEI 6-pack is the strongest, clearest, and most versatile option. For a single hero piece, a solid walnut display base with felt feet is the premium pick.
What are good display stands for model builds?
Good display stands for model builds match the model’s scale, support the center of gravity, and use a material that complements the kit. For Gundam, the Bandai Action Base line is the standard. For aircraft, the Trumpeter Aircraft Display Stand fits 1/48 to 1/72. For diecast cars, the 3 Tier Car Model Display Stand holds three 1/24 cars in a compact footprint. For multi-item shelves, the HIIMIEI 6-pack of clear acrylic risers is the best universal pick.
How do I choose the right display stand?
Choose a display stand by matching four things: the model’s scale, the model’s center of gravity, the material you want (acrylic, plastic, wood, or metal), and whether you want static or dynamic display. Always check the practical weight capacity (lower than the published number for top-heavy models) and the peg or cradle size for your kit.
What is the best action figure stand?
The best action figure stand is the Bandai Action Base 1/100 for 1/100 scale and the Action Base 2 (1/144) for smaller scales. Both have 3mm peg holes, locking sliders, and the ability to interlock for multi-figure displays. For non-Gundam figures, an adjustable arm stand like the FaitAtten 3-pack or a clear acrylic riser is a good alternative.
What is the best way to display model aircraft?
The best way to display model aircraft is in flight pose on a clear cradle stand like the Trumpeter Aircraft Display Stand for 1/48 to 1/72 scale, or on an angled acrylic riser for larger scales. For gear-up aircraft, a magnetic mount or a single brass rod into the belly keeps the model in clean flight pose without visible support struts.
Are acrylic display stands better than plastic?
Acrylic display stands are clearer and more modern than painted plastic, but they yellow under UV light over 3-5 years and can crack under heavy loads. Painted plastic stands (like the Bandai Action Base) are more durable, never yellow, and visually weigh the display down. For most modern collections, a mix of both is the right answer: acrylic risers for figures, painted plastic Action Bases for action poses.
Final Verdict: Which Model Display Stand Should You Buy?
If you only buy one stand from this guide, get the Bandai Action Base 1/100 (Black). It’s the most flexible Action Base, the most-trusted brand in the hobby, and the one that fits the widest range of 1/100 kits. Pair it with the HIIMIEI 6-pack of acrylic risers for a tiered shelf and you’ll have a complete display system for under $50.
For a budget starter set, the Bandai Action Base 2 (1/144) at 2,676 reviews is the cheapest “buy once, cry once” option. For aircraft builders, the Trumpeter Aircraft Display Stand is the only real choice. For dynamic showcase, the JAYEGT Motorized Rotating Display Stand is the most fun stand we’ve tested this year.
Whatever you choose, the best model display stand is the one that gets your build off the workbench and onto a shelf where you can actually see it. We hope this guide makes that step easier. For a fully enclosed display, check our guide to the best display cases for model kits next.