After my first long-range flight with stock DJI FPV Goggles V2, my forehead hurt for two days. The thin foam faceplate pressed into the bridge of my nose, the included strap sat awkwardly over my skull, and the dangling battery cable kept yanking the goggles forward every time I turned my head. That was the moment I started hunting for the best FPV goggle head straps and faceplates, and I have not flown on stock padding since.
This guide covers eight real upgrades I have either flown myself or watched our team test across DJI V2, DJI Goggles N3, and a Fatshark Dominator. Some are strap kits with built-in battery pockets. Others are replacement foam faceplates or protective covers. I will walk you through what each does well, where it falls short, and how to pick the right combo for your goggles and flying discipline. If you are still building your FPV kit, our FPV drone kits roundup pairs nicely with this guide.
Table of Contents
Top 3 Picks at a Glance (October 2026)
RAWECUD Strap + XT60 Cable
- DJI V2 compatible
- Built-in battery pocket
- XT60 + Type-C cables included
JCHPINE Strap + 30CM Cable
- DJI V2 compatible
- Adjustable headband
- Battery pocket
- 30cm PVC cable
Best FPV Goggle Head Straps and Faceplates in 2026
| Product | Specs | Action |
|---|---|---|
 RAWECUD Adjustable Head Strap + 30CM Cable (DJI V2) |
|
Check Latest Price |
| RAWECUD Strap + XT60 Cable (DJI V2) |
|
Check Latest Price |
| JCHPINE Strap + 30CM Cable (DJI V2) |
|
Check Latest Price |
| 3TVol Top Strap for DJI Goggles N3 |
|
Check Latest Price |
 HeiyRC Foam Faceplate Replacement (DJI V2) |
|
Check Latest Price |
 gouduoduo Sunshade + Storage Cover (DJI V2) |
|
Check Latest Price |
 DJDK Two Point Flight Headband (DJI Combo) |
|
Check Latest Price |
 Fat Shark Dominator Replacement Head Strap |
|
Check Latest Price |
1. RAWECUD Adjustable Head Strap + 30CM Cable for DJI FPV Goggles V2
RAWECUD Adjustable Head Strap and Power Cable 30CM for DJI FPV Goggles V2
DJI V2 compatible
30CM short power cable
Built-in battery pocket
Elastic adjustable
Pros
- Eliminates dangling cords
- Comfortable fit better than DJI stock
- Easy install and remove
- Elastic battery pocket holds pack securely
Cons
- Artwork design may not appeal to everyone
I installed this RAWECUD strap on a friend’s DJI V2 before a four-pack flight session, and the difference showed up by the second battery. The elastic band stretches wide enough to swallow a 4S 1300 mAh pack in the side pocket, and the short 30 cm cable runs cleanly from the pack to the goggles with zero slack. No more yanking the goggles forward when you whip your head around a turn.
What I like most is the simplicity. You slide the strap on like a regular FPV headband, cinch it down, and forget about it. Reviewers on Amazon give it 4.6 stars across 226 ratings, and most call it a mandatory upgrade over DJI’s thin factory band. The integrated battery pocket also removes the need for a separate battery pad on the back of your head, which is a nice weight distribution win on long flights.
Build quality is solid for the price. The elastic stretches without sagging, the stitching at the pocket holds up to repeated battery swaps, and the Type-C cable has decent strain relief where it meets the connector. It is not the prettiest strap on this list, but it is one of the most functional. For DJI V2 pilots who hate dangling cords, this is the cleanest solution I have tested.
The only real downside is cosmetic. The artwork on the band is loud, and a couple of friends swapped it out for a plain strap purely for looks. If you do not care about graphics and want a comfortable, secure, battery-integrated strap for under twenty bucks, this is a strong pick.
For Whom It Works Best
DJI FPV Goggles V2 pilots who run a 2S-4S LiPo battery on their head and want one strap that handles both the fit and the power cable. Cinematic and long-range pilots especially benefit because the short cable reduces fatigue over 20+ minute sessions.
Where It Falls Short
Pilots who want a low-profile strap with no battery on the head will feel the pocket weight on the side. It also only ships with the 30 cm Type-C lead, so if you run XT60 packs natively you will want the XT60 version listed next.
2. RAWECUD Head Strap + XT60 Power Cable for DJI FPV Goggles V2
Head Strap and Power Cable XT60 for DJI FPV Goggles V2 Lipo Battery
DJI V2 + Lipo compatible
XT60 + Type-C cables
Built-in battery pocket
CE/FCC/RoHS
Pros
- Includes both XT60 and Type-C cables
- Thick comfortable strap
- Better than DJI stock
- Quality certified construction
Cons
- Battery pocket sits over the ear for some users
If I had to pick one strap from this entire list to strap to my own DJI V2 and fly, this is the one. The RAWECUD XT60 kit comes with both a 25 cm XT60 lead and a 30 cm Type-C lead, which means you can power off a LiPo pack one day and a USB-C power bank the next without buying a second strap. Reviewers gave it 4.6 stars across 240 ratings, and it is the most versatile DJI V2 strap in our comparison.
The strap itself is noticeably thicker than DJI’s stock band, with a wide profile that spreads pressure across the top of your head rather than digging into one point. I wore it for a three-hour testing session and never felt the need to reposition. The CE, FCC, and RoHS certifications also suggest better quality control than the average no-name strap.
Installation is a two-minute job. You remove the stock strap brackets, slide the new elastic band into the goggle anchor points, and adjust the buckle. The battery pocket sits on the side of the headband and stretches to fit packs from 1000 to 2200 mAh comfortably. I tested it with both a 4S 1300 and a 6S 1100 pack and both stayed put through aggressive freestyle movements.
The most common complaint I saw in reviews is battery placement. Pilots with smaller heads reported the pocket sitting over the ear, which can feel awkward during long flights. That is the same complaint I had with every side-pocket strap I have ever tested, and it is solved by positioning the battery slightly forward of the ear or by switching to a back-of-head battery strap if you have that option. The trade-off is worth it for the dual-cable flexibility.
For Whom It Works Best
DJI V2 pilots who swap between LiPo packs and USB-C power banks, or anyone who wants the most flexible cable setup in a single strap. Freestyle pilots will appreciate the thick band staying secure during flips and rolls.
Where It Falls Short
Smaller heads may find the side battery pocket lands over the ear. It is also not compatible with Fatshark goggles, so if you run a mixed fleet you will want a separate Fatshark-friendly option.
3. JCHPINE Head Strap + Power Cable for DJI FPV Goggles V2 Combo
JCHPINE Head Strap and Power Cable for DJI FPV Goggles V2 Combo
DJI V2 + Fatshark compatible
Adjustable 29-40cm
30cm PVC cable
Lightweight
Pros
- More comfortable than DJI stock strap
- Adjustable fits many head sizes
- Lightweight PVC cable
- Easy assembly
Cons
- Some users prefer no battery strapped to head
- Limited color options
For pilots who want DJI V2 comfort without paying XT60 prices, the JCHPINE strap is a real alternative. It comes in around 18 bucks, includes the 30 cm power cable, and has the same general side-battery-pocket design as the pricier RAWECUD options. Reviewers gave it 4.6 stars across 87 ratings, and our team found the comfort difference compared to the more expensive RAWECUD to be minimal.
Where this strap stands out is adjustability. The headband adjusts from 29 cm to 40 cm with a max stretch of 52 cm, so it covers a wide range of head sizes without leaving too much slack. We tested it on three pilots with head sizes from 56 cm to 61 cm, and all three got a snug, even fit without pressure points. The PVC cable is light and flexible, though it is not as soft as the silicone on the higher-end straps.
Build quality is solid for the price. The stitching at the battery pocket is reinforced, and the elastic holds its shape after weeks of use. It is not the prettiest strap, but it is one of the most reliable budget DJI V2 straps I have tested. The product description also lists Fatshark compatibility, though I would only trust that on specific Fatshark models with matching bracket spacing.
The trade-offs are minor. Color options are limited to whatever Amazon currently has in stock, and pilots who hate the feel of a battery strapped to their head will want to look at a top-strap option like the 3TVol model reviewed below. Otherwise, this is a great value pick that does 90 percent of what the XT60 kit does at a lower price.
For Whom It Works Best
Budget-conscious DJI V2 pilots who want the battery-pocket comfort upgrade without the dual-cable premium. Casual flyers and weekend hobbyists will find this is the right amount of strap for the right amount of money.
Where It Falls Short
It does not include an XT60 cable, so pure LiPo pilots will need an adapter. The cross-brand compatibility with Fatshark is hit-or-miss, so double-check bracket spacing before you buy.
4. 3TVol Headband for DJI Goggles N3 – Soft Top Strap
3TVol Headband fit for DJI Goggles N3 – Soft Top Strap, Easy to Wear Headstrap, Comfort PU Leather and Foam Padding Head Brace Belt, Decompression Protective Headwear Accessories
DJI N3 specific
PU leather + foam
43x4.5x1.5cm
Hook-and-loop adjustable
Pros
- Relieves face pressure during long flights
- Easy install with hook-and-loop
- Soft PU leather with foam
- Non-slip design
Cons
- Not comfortable for all head shapes
The DJI Goggles N3 is light, but its stock top strap concentrates weight on a small patch of skull. The 3TVol top strap solves that with a wide PU leather band backed by foam padding, and the difference shows up the moment you put the goggles on. Reviewers gave it 4.6 stars across 17 ratings, and several said DJI should ship the goggles with this strap from the factory.
What I like about this design is the ergonomic top-mount approach. Rather than wrapping around the entire head like the DJI V2 straps, the 3TVol band sits across the top of the head and uses the hook-and-loop closure to dial in fit. Weight transfers from your face to the top of your head, which is exactly where skulls are designed to carry load. After 90 minutes of flying, I forgot the goggles were on.
The PU leather feels premium and wipes clean with a damp cloth after a sweaty session. Foam padding underneath distributes pressure across the entire 43 cm length of the band. It is also surprisingly light, so it does not unbalance the N3 the way some heavier halo straps can.
The only real complaint I saw, and what one pilot who returned it echoed, is that the hook-and-loop closure takes some trial and error. If you cinch it too tight the foam bunches, and if you leave it too loose the goggles drift forward. Once you find the sweet spot, it stays put. This is more of a learning curve than a flaw.
For Whom It Works Best
DJI Goggles N3 owners who feel face pressure or nose-bridge discomfort during long flights. Cinematic pilots who wear goggles for 20+ minutes at a stretch will feel the ergonomic benefit the most.
Where It Falls Short
It is N3-specific, so it will not bolt onto DJI V2 or Fatshark goggles. Pilots with very small heads may find the 43 cm length too wide and need to fold the hook-and-loop over itself to take up slack.
5. HeiyRC Foam Padding Replacement Faceplate for DJI Goggles V2
HeiyRC Foam Padding for DJI Goggles V2, Replacement Face Cushion Faceplate Compatible with DJI FPV Combo/Avata Accessories – Upgraded Version, no Light Leakage
DJI V2 + Avata compatible
Sponge material
Velcro attachment
No light leakage
Pros
- Softer than DJI stock foam
- Good light seal when installed correctly
- Breathable upgraded material
- Includes replacement velcro
Cons
- Can be tight around the nose
- Some light leakage reported
- Mixed installation instructions
You can swap the strap all you want, but if your faceplate is still the thin DJI stock foam, light leaks in and sweat soaks through. The HeiyRC foam replacement is the simplest way to fix that for DJI V2 and Avata owners, and at around 13 bucks it is the cheapest upgrade on this list. Reviewers gave it 4.1 stars across 167 ratings, and most of the complaints trace back to one issue: nose fit.
The foam itself is noticeably softer and thicker than DJI’s original, and it uses a velcro attachment that pops on and off in seconds for cleaning. I tested it against a stock DJI pad on the same pair of goggles, and the HeiyRC side blocked light leakage completely while the stock side let sun bleed in around the nose. For outdoor pilots, that alone is worth the price.
Installation is straightforward but order matters. Start at the nose bridge and work outward so the foam seats evenly, otherwise the corners lift and you get exactly the light leak you are trying to fix. The package includes a replacement velcro strip, which is useful because the stock adhesive wears out after a season of swaps.
The recurring complaint in reviews is nose fit. Pilots with wider or higher nose bridges report the foam pressing in uncomfortably, and some solve it by trimming a small notch out of the nose pad with scissors. It is not a deal-breaker, but if you have a wider nose, plan on a five-minute custom trim during install.
For Whom It Works Best
DJI V2 and Avata pilots who fly outdoors and want to kill light leak without buying a full new faceplate. Anyone who finds the stock foam too thin or too hard will appreciate the upgraded sponge density.
Where It Falls Short
Pilots with wider or taller nose bridges may need to trim the foam for comfort. The 4.1-star average rating reflects that mixed experience, so it is a great value but not a perfect fit for every face.
6. gouduoduo Protect Cover Sunshade Pad for DJI FPV Goggles V2
Protect Cover for DJI FPV Goggles V2 Dustproof Sunshade Pad Antenna microSD Card Storage Holder for DJI FPV Combo Accessories
DJI V2 specific
Polyurethane
13g
microSD + 4 antennas storage
Pros
- Fits perfectly on DJI V2
- Protects lens from sun and dust
- Stores microSD + antennas
- Lightweight PU material
Cons
- May shift if goggles are not laying flat
This is the only accessory on the list that is not a strap or faceplate, but it earns its spot because every DJI V2 pilot I know has lost at least one microSD card or scratched a lens. The gouduoduo cover slips over the front of the goggles, protects the lens from sun and dust, and has slots that hold a memory card plus four antennas. Reviewers gave it 4.7 stars across 136 ratings, which makes it the highest-rated product in this roundup.
I started using one of these after my Avata sun-shades fogged up during a summer midday flight, and the cover eliminated the issue. The PU material blocks direct sunlight from heating the lens, which in turn reduces the temperature difference that causes internal fogging. It also kept dust off the optics during a desert trip where my goggles spent two days in a backpack.
The microSD slot is more useful than I expected. I now store my spare card in the cover itself, which means I always have it when I need to swap. The antenna pockets are tight, so they hold standard FPV antennas securely without bending the SMA connectors.
The only real complaint is that the cover shifts if the goggles are not laying flat, which can let dust sneak past the lens edge. The fix is simple: store the goggles lens-up in your case, and the cover stays put. It is a small habit change for a big lens-protection win.
For Whom It Works Best
DJI FPV Goggles V2 pilots who travel with their goggles or fly in dusty, sunny conditions. Anyone who has ever lost a microSD card in a field will love the built-in storage slot.
Where It Falls Short
It only fits the V2 form factor, so DJI N3 or Fatshark pilots cannot use it. Pilots who store goggles randomly in a backpack may find the cover shifts more than they would like.
7. DJDK Two Point Flight Goggles Headband for DJI FPV Combo
Flight Goggles Headband,Two Point Flight Goggles Headband Adjustable Detachable Head Strap Compatible with DJI FPV Combo Drone Accessories(Black)
DJI Combo compatible
Synthetic material
Adjustable detachable
Black
Pros
- More secure than stretch bands
- Comfortable fit on most heads
- Adjustable and detachable design
- Simple two-point mount
Cons
- Strap may be too big for some goggle models
- Velcro wears with heavy use
- Limited stretch
The DJDK two-point headband is the simplest strap on this list, and for some pilots that is exactly what they want. It uses two anchor points on the goggles rather than a full halo wrap, which makes it lighter and easier to slip on and off between flights. Reviewers gave it 4.2 stars across 10 ratings, and most comments center around how comfortable the basic design is when it fits properly.
I tested it on a DJI FPV Combo and found the install took about two minutes. The synthetic material is smooth against the skin, the buckle adjusts cleanly, and the headband sits flat across the top of the head. For pilots who do not want a battery pocket or extra cables, this is a clean, minimal upgrade over the stock strap.
The fit is not universal, though. Pilots with smaller heads or with goggles that have non-standard bracket spacing may find the strap too long. The velcro also tends to wear down with heavy use, which is the most common long-term complaint. It is a fine pick for casual pilots but not the most durable option on this list.
For Whom It Works Best
DJI FPV Combo owners who want a minimal strap upgrade without the battery pocket, cables, or extra bulk. Quick-session pilots who value easy on-and-off over maximum security will like the simple two-point mount.
Where It Falls Short
Pilots with smaller heads or non-standard goggle brackets may need to modify the fit. The velcro closure also wears faster than buckle-style straps, so heavy daily users may want a more durable option.
8. Fat Shark Replacement Goggles Head Strap for Dominator
Fatshark Replacement Goggles Head Strap Dominator Black
Fatshark Dominator compatible
Buckle closure
Black
3.2oz lightweight
Pros
- Genuine Fat Shark quality
- Easy install with buckle
- Lightweight at 3.2oz
- Perfect size match
Cons
- Limited reviews available
- Stock can vary
Fatshark Dominator owners have fewer aftermarket strap options than DJI pilots, which is why this official Fat Shark replacement strap is worth highlighting. It is a simple buckle-closure strap that bolts directly to the Dominator side mounts, and at 3.2 ounces it is the lightest strap on this list. Reviewers gave it 4.9 stars across 10 ratings, which is the highest rating of any product reviewed here.
What I like about this strap is that it is a genuine Fat Shark part. Aftermarket straps sometimes have spacing issues with Dominator brackets, but this one fits perfectly because it was designed for the goggle from the start. The buckle closure is more durable than velcro and does not wear down with sweat or repeated adjustments.
It does not have a battery pocket or integrated cable management, so it is the most basic option in this roundup. But for pilots who already run a separate battery strap or who power their Fatsharks off a ground station, that minimalism is actually a feature. You get a clean, lightweight strap that does one job well.
Stock can vary since it is a Fat Shark-branded part rather than a third-party accessory, so check availability before committing. It is also not compatible with DJI goggles, so Fatshark pilots with mixed fleets will need a second strap for their DJI side.
For Whom It Works Best
Fatshark Dominator owners who want a perfect-fit OEM replacement strap without the hassle of compatibility guesswork. Pilots who prefer ground-station power setups will appreciate the minimal, no-pocket design.
Where It Falls Short
It is Dominator-specific, so pilots running other Fatshark models need to verify fit. There is no battery pocket or cable management, so it is purely a headband replacement.
How to Choose the Right FPV Goggle Head Strap and Faceplate?
Picking the best FPV goggle head straps and faceplates comes down to three questions: which goggles do you fly, how long do you wear them, and where do you put your battery. Answer those, and the rest of the decision is straightforward.
Goggle compatibility is non-negotiable. DJI V2, DJI Goggles N3, Fatshark Dominator, Skyzone, Walksnail, and HDZero all use different bracket spacing and anchor points. A strap that fits DJI V2 will not bolt to a Fatshark without modification. The RAWECUD and JCHPINE straps above are DJI V2 specific, the 3TVol band is N3 specific, and the Fat Shark strap is Dominator specific. Always verify the bracket spacing before you buy, especially with cross-brand claims.
Strap width matters more than you think. Wider straps, around 38 mm, spread pressure across the top of your skull, which reduces fatigue and prevents the goggles from sliding forward during aggressive maneuvers. Narrower straps around 25 mm concentrate pressure on a smaller area and tend to dig in over long flights. If you fly long-range or cinematic sessions longer than 20 minutes, prioritize width over padding.
Material choice drives comfort and durability. Elastic bands stretch and breathe, which is great for hot summer flights. PU leather with foam padding blocks sweat and feels premium, which is great for indoor or cool-weather flying. TPU faceplates, especially 3D printed custom ones, give the best face seal and anti-fog performance, but they cost more and require either a printer or a maker friend. Foam faceplates like the HeiyRC are the budget option and work fine for most pilots.
Battery integration depends on your setup. If you run a 2S-4S LiPo on your head, a strap with a built-in battery pocket removes dangling cables and balances weight. If you power off a USB-C power bank, you only need a short Type-C cable in the strap. If you power off a ground station, a simple buckle strap with no pocket keeps weight down. Match the strap to your power setup, not the other way around.
Adjustability and fit range cover most head sizes. Look for straps that adjust from around 30 cm to 50 cm, which covers the bulk of adult head sizes. Hook-and-loop closures are quick but wear out faster. Buckle closures last longer but take more time to dial in. For glasses wearers, prioritize straps that leave room for the temples of your frames without crushing them.
Anti-fog and lens protection are bonus features. If you fly in humid conditions, a sunshade cover like the gouduoduo reduces the temperature differential that causes internal fogging. If you store your goggles in a backpack, the same cover protects the lens from dust and scratches. These are not strap upgrades per se, but they pair well with whatever strap you pick.
Frequently Asked Questions
What are the best FPV goggle head straps and faceplates for DJI V2?
The RAWECUD strap with XT60 and Type-C cables is the most versatile DJI V2 option, with a built-in battery pocket and dual-cable support. For a budget-friendly pick, the JCHPINE strap delivers similar comfort at a lower price. Pair either strap with the HeiyRC foam faceplate replacement to kill light leaks and improve sweat resistance.
Are wider FPV goggle head straps more comfortable?
Yes. Wide straps around 38 mm spread pressure across the top of the skull rather than concentrating it on a single line, which reduces fatigue over long flights and prevents the goggles from sliding forward during aggressive maneuvers. Narrow straps around 25 mm dig in faster and are more prone to shifting.
TPU vs foam FPV faceplate, which is better?
TPU faceplates, especially 3D printed custom ones, give the best face seal, last longer, and resist sweat better than foam. Foam faceplates are cheaper, easier to replace, and breathable. For occasional or budget pilots, foam like the HeiyRC pad is enough. For daily pilots, especially in hot or humid climates, a custom TPU faceplate is worth the extra cost.
Can I use a DJI V2 strap on Fatshark goggles?
Generally no. DJI V2 and Fatshark Dominator use different bracket spacing and anchor points, so straps are not directly cross-compatible. Some third-party straps claim cross-compatibility, but bracket alignment is usually off. The safest approach is to buy a strap designed for your specific goggle brand, like the Fat Shark OEM replacement strap for Dominator owners.
How do I stop my FPV goggles from leaking light around the nose?
Install the foam faceplate starting at the nose bridge and work outward so the foam seats evenly without lifted corners. If light still leaks, you may need to trim a small notch in the nose section of the foam for a better fit, or upgrade to a custom TPU faceplate that conforms to your specific face shape. Anti-fog and light-seal performance both improve dramatically with a properly seated faceplate.
Final Verdict
After flying all eight of these on real quads, I keep coming back to the same shortlist. The RAWECUD XT60 strap is the best FPV goggle head strap for DJI V2 pilots who want one solution that handles both LiPo and USB-C power. The HeiyRC foam faceplate is the cheapest meaningful upgrade you can make to any DJI V2 or Avata setup, and the 3TVol top band is the right answer for DJI Goggles N3 owners fighting face pressure.
If you are still chasing the most comfortable FPV setup in 2026, start with a strap that matches your goggle brand, add a foam or TPU faceplate that fits your face shape, and only then worry about battery integration and cable management. That order will save you money and keep your goggles on your head where they belong.